Metallic Epoxy Floor Installation in Sumter, SC

Sumter Epoxy Floors installs metallic epoxy flooring for homeowners and small business owners across Sumter County, SC. A metallic epoxy floor gives plain concrete a swirled, marble-like look with real depth, and it makes a garage, showroom or living space easier to clean. The worry we hear from most people is simple: what if I pay for a beautiful floor and it peels? That is why this page spends as much time on prep and moisture as it does on color. A well-prepared slab is what keeps a floor looking good.

Get a Free Estimate or call (839) 600-9293 to talk it through.

What’s included in prep: cleaning, diamond grinding, crack and pit repair, and a moisture check before any coating goes down.

How a Marble-Look Floor Is Made

A metallic epoxy floor is built in layers. A pigmented base coat goes on first. Then a clear epoxy mixed with metallic pigments is poured and worked across the surface with rollers, brushes and other tools. The pigments float and settle in swirls, which creates the marble epoxy floor effect. A clear topcoat finishes it and protects the color.

No two floors come out identical. The pattern depends on how the material flows, the temperature, and how the installer moves it, which is part of the appeal. Because the look is made by hand, a sample board is a better guide than a catalog photo.

Who This Floor Suits

• Homeowners with a worn garage floor who want it to look like part of the house.
• Families finishing a basement, sunroom or open living area who want a hard, wipe-clean surface without grout lines.
• Small business owners with a salon, shop, showroom or office lobby where the floor is the first thing customers notice.
• Shaw AFB families and other Sumter-area homeowners who want a durable finish that handles heavy daily use.

Color and Pattern Options

Color is where a metallic epoxy floor gets personal. You choose a base color, then one or more metallic pigments that sit on top. A dark charcoal base with silver or copper pigment gives a stone-like look. A deep blue base with a pearl pigment looks like water or storm clouds. Tan and bronze combinations read as warm and earthy, which suits living spaces.

Pattern is controlled by how much pigment goes in and how it is worked. A lighter hand gives soft, cloudy movement. A heavier hand gives bold ribbons, pools and veining. If you want a marble epoxy floor, we can aim for white-and-gray veining, though the result will always be a close cousin of marble, not a copy.

Who it is for: anyone who wants a floor that looks custom. The benefit is a surface that matches your space and hides small scuffs better than a flat, solid color. We suggest looking at samples in your own light. Garage lighting and living room lighting change how metallic pigments read.

Garage, Showroom and Living Space Uses

Garages. A metallic finish turns a utilitarian slab into a space you are proud to open the door on. The epoxy resists oil drips and tire marks and wipes clean, which suits a garage that doubles as a workshop or hangout.

Showrooms and shops. A small business floor does a lot of quiet marketing. Metallic epoxy gives a polished, high-end look, and the continuous surface is easy to mop between customers. It works for salons, boutiques, auto detailing bays and offices.

Living spaces. Basements, sunrooms and open-plan areas on a slab are good candidates. There are no grout lines to stain, and the surface is simple to keep clean with pets and kids around.

One thing to know: indoor floors that get wet or see foot traffic may need added texture for traction. OSHA 29 CFR 1910.22 covers walking-working surfaces for workplaces, and a business floor should be kept in line with it. We can add a fine grit to the topcoat so the floor does not feel slick.

Step by Step: From Bare Slab to Finished Floor

1. Look and test. We check the slab for cracks, old coatings, stains and signs of moisture. Moisture testing follows ASTM F2170 (in-situ relative humidity) or ASTM F1869 (calcium chloride). The calcium chloride test only reads the top quarter inch of the slab, so it can miss deeper moisture (Construction Canada, accessed Oct 2026). Typical epoxy coatings call for slab relative humidity of 75 percent or lower, but the coating maker’s data sheet sets the real limit (One Stop Epoxy, accessed Oct 2026).
2. Grind the surface. Diamond grinding opens the pores of the concrete so the coating can grip. Our prep aims for a surface profile consistent with ICRI Guideline 310.2R.
3. Repair. Cracks, pits and spalls are filled and leveled.
4. Base coat. The pigmented base goes down and cures.
5. Metallic coat. The metallic epoxy is poured and worked into its pattern.
6. Clear topcoat. One or more protective coats seal the color and add wear resistance.

What You Gain

• Easy cleaning. A sealed, continuous surface wipes down with a mop.
• Resistance to oil and hot tires. A properly prepped and cured floor holds up to garage use.
• A one-of-a-kind look. The pattern is created on site, not unrolled from a box.
• Slip resistance when you want it. A fine additive in the topcoat adds grip for wet or busy areas.
• A cleaner slab overall. Sealing the surface cuts down on dust from bare concrete.

Care and Maintenance

Metallic epoxy is simple to look after, and a few habits protect the finish. Sweep or dust-mop regularly, since grit acts like sandpaper under shoes and tires. Mop with warm water and a pH-neutral cleaner. Skip harsh solvents and abrasive pads, which can dull the topcoat.

In a garage, wipe up oil, brake fluid and chemical spills when you see them. Use felt pads or wide-base feet under heavy furniture and toolboxes so you do not scratch the surface. A walk-off mat at the entry door catches the grit that does most of the damage.

Who it is for: homeowners and business owners who want a floor that stays good-looking without a weekly project. The benefit is a floor that looks fresh with ordinary cleaning. If the topcoat eventually wears from heavy traffic, a fresh clear coat can often be applied over the top, which is far cheaper than redoing the whole floor. We will tell you plainly at the estimate if a floor is a candidate.

Humid Summers and Your Slab

Sumter has a humid subtropical climate, with average daily highs of 87.3°F in June, 90.2°F in July and 88.5°F in August (Wikipedia, Sumter, South Carolina, accessed Oct 2026). Heat and humidity matter because concrete can hold and release moisture, and trapped moisture is a common reason coatings bubble or lift. That is why moisture testing comes before color selection, not after.

Investment Guide

Pricing depends on slab size, the condition of the concrete, the repairs needed, and the design you choose. Metallic epoxy runs about $8 to $15 per square foot, according to Intermountain Coatings (Epoxy Flooring Cost Per Square Foot guide, July 2025). Prep adds to that: basic cleaning and etching about $1 to $2 per square foot, diamond grinding for damaged concrete about $2 to $4, and crack repair and patching about $3 to $5 (Intermountain Coatings, July 2025).

For general epoxy, Angi reports typical prices of $750 to $3,000 for a one-car garage of about 250 square feet and $1,500 to $6,000 for a two-car garage of about 500 square feet (Angi, updated Aug 3, 2026). Metallic work usually sits toward the higher end because it takes more material and more hands-on labor.

Timeline depends on the size of the floor, repairs and cure times. We will give you a realistic schedule in your written quote.

The estimate visit: we come to you in Sumter, Shaw AFB-area neighborhoods, Dalzell, Mayesville, Pinewood, Manning and nearby communities along US 15, US 76/378 and SC 441. We look at the slab, test for moisture, talk through colors, and leave you a written quote at no charge. Being local means follow-up visits are close to home.

Questions People Ask

How much does a metallic epoxy floor cost in Sumter, SC?

Metallic epoxy runs about $8 to $15 per square foot (Intermountain Coatings, July 2025), before any prep for cracks or grinding. Prep and repair add cost depending on the slab. A free on-site estimate gives you a written number based on your actual floor, not a national average.

Will a metallic epoxy floor peel?

Peeling is almost always a prep or moisture problem, not a flaw in the product. Grinding the slab, repairing damage and testing for moisture before coating are what keep a floor bonded. Skipping those steps is how coatings fail early.

Do I need a moisture test first?

Yes. Concrete that holds too much moisture can push a coating off the slab. Tests like ASTM F2170 measure humidity inside the slab, and the coating maker’s data sheet sets the allowed limit. We test before we quote a final plan.

Is a metallic epoxy floor slippery?

A glossy floor can feel slick when wet. A fine grit mixed into the topcoat adds traction without changing the look much. Tell us if the floor will see water, pets or customers, and we will build in the right texture.

Can metallic epoxy go over cracked or painted concrete?

Often yes, after prep. Cracks are repaired and old paint is ground off so the new coating bonds to concrete, not to a layer that can peel. Some badly damaged slabs need extra repair first, and we will say so at the estimate.

Ready for a Floor You’re Proud Of?

If you are weighing a metallic epoxy floor for your garage, shop or living space, start with a visit. We will check the slab, explain the prep, and give you a written quote. Get a Free Estimate or call (839) 600-9293.